AZ16E-300绝对式测量,配有指示器位置测量和可视化,最多可用于三轴

    7 位数字 LCD 显示器
    参考值可设置
    符号、电池状态、单位和“°”字符
    可选择显示模式:毫米、英尺,有分数显示
    可调计数方向
    可调小数点和倍增因数
    按键可锁定
    通过嵌入式外壳轻松安装(与Z16兼容)
    多达3个外置磁性传感器(可切换)
    增量式和绝对式测量之间切换
    3个可调整的移位补偿量
    可选2个外置输入,用于的特殊功能,通过RJ45
    可选2个外置输入,通过RJ45
    可用接口:RS232/RS422/RS485/868 MHz

Produktanfrage

MECHANICAL DATA

Housing norm panel housing
Housing material ABS plastic, black
Housing dimensions (W x H) 96 x 72 mm
Panel cut out (W x H) 93 x 67 mm
Keyboard foil with short stroke keys
Installation depth (complete) 38 mm

ELECTRICAL DATA

 

Display 7 digit LCD with sign, battery state and measurement units
Perspective 12 o'clock
Measurement units mm / inch / m 
Accuracy ± 1 digit
Power supply voltage battery  (1.5 V resp. 3 V), integrated or external
Current consumption < 1 mA bei 1.5 V, with measuring system
Battery Service life up to 4 years, depending on power-on time
Interface RS485
External inputs 2 x 5 ... 30 V (on request)
External outputs 2 x 30 V open collector (on request)
Connections standard: RJ45 socket, optional: fixed cable outlet
Data memory Flash

ENVIRONMENTAL CONDITIONS

 

Operating temperature 0 ... +50 °C
Storage temperature -10 ... +60 °C
Humidity max. 80 %, non-condensing
Protection class (front) IP54 
Protection class (rear) IP40

MAGNETIC SENSOR

 

Type designation AZS-100 (standard), AZS-50 (on request)
Dimensions (L x W x H) 100 x 12 x 25 mm
Measuring principle magnetic, absolute
Required magnetic tape AB20-40-10-1-R-11
Magnetic tape pole pitch 4 mm
Distance sensor/ tape 1.5 mm
Resolution 0.1 mm
Repeat accuracy ±2 increments
Interface (absolute) RS485
Maximum measuring length 8.0 m
Housing material plastic ABS
Protection class IP67
Connections RJ45 (male) connector
Sensor cable drag-chain suitable, high-flexible, 4-wire/ shielded
Sensor cable length 1, 2, 3, 5 m, others on request, maximum cable length 20m
Sensor cable bending radius min. 25 mm
Weight approx. 40 g
Humidity max. 95 %, non-condensing
Influence of external magnetic fields external magnetic fields > 1 mT, which directly impinge upon the sensor, can affect the system accuracy.