IZBox-600测量和传输系统实际值通过868 MHZ无线电传输

    内置868 MHz无线电模块
    高性能陶瓷天线(内置)
    传输距离可达200米(具有可视性)
    可选择四种分辨率(0.01 / 0.05 / 0.10 / 1.00毫米)
    线性或旋转测量的测量系统
    内置电池槽(有盖子),用于1.5 V单节电池
    两个状态LED指示灯,用于首次启动(可关闭)
    RF传输,通过外置输入进行循环或释放
    通过外置输入对测量值进行复位
    通过DIP开关进行系统配置设置
    安装方便(通过安装孔或可选带导轨的卡扣附件)
    传感器不活动时Auto Power Off 自动节电模式
    Auto Power On 自动恢复,通过移动传感器

Produktanfrage

MECHANICAL DATA

Housing (Evaluation units) ABS plastic, black
Housing dimensions (L X W x H) 150 x 80 x 39.5 mm
Total height 67 mm (incl. senor connector)
Mounting standard: four mounting holes and 
two 30 mm slotted holes for M4 screws
optional: snap-on attachment for top hat rail

ELECTRICAL DATA

 

System configuration via 32 DIP switches
System resolution (adjustable)  0.01 / 0.05 / 0.10 / 1.00 mm
Power supply voltage 1.5 V battery (type D, mono cell)
Current consumption < 1 mA at 1.5 V during normal 
operation without radio transmission
approx. 5 mA at 1.5 V during 
continuous radio transmission 
Battery Service life 1 … 3 years (depending on battery 
type and effective on-time)
External inputs 2 (via RJ45 socket)
- manual reset (measurement value)
- manual wireless transmission
Accessory RF-MODULE 868 MHz RS232 (Box), RF-MODULE 868 MHz USB (Stick), IZ16-620: external slave indicator 
Snap-on attachment for top hat rail (Art. No.  764000006)

ENVIRONMENTAL CONDITIONS

 

 

Operating temperature 0 ... +50 °C
Storage temperature -10 ... +60 °C
Humidity max. 80 %, non-condensing
Protection class IP40

868 MHZ SPEZIFIKATIONS

 

 

Range up to 200 m (by intervisibility)
HF-data rate 38 kbps
Power output typ 2 dBm e.i.r.p. (10 dBm an 50?)
Input sensitivity up to -102 dBm (-110 dBm an 50?)
FrFrequency range 863 - 868.6 MHz
Channel spacing 50 kHz
Modulation method 2-FSK, MSK
Antenna integrated ceramic antenna
Topology point to point
Transmission bi-directional, half-duplex, with receipt, with CRC-checksum calculation, five-time repeating of non-acknowledged radio telegrams
Addressing 2 byte address space, max. 64000 different addresses
Conformity (Europe) EN 300220-1, EN 301489-1/-3, EN 60950-1, EN 50371

 

MAGNETIC SENSOR

Type designation MS-250
Dimensions (L x W x H) 30 x 10 x 15 mm
Measurement principle magnetic, incremental
Required magnetic tape MB20-25-10-1-R (for linear measurements)
Required magnetic ring MR 3848 (for rotative applications)
Pole pitch (magnetic tape/ ring) 2.5 mm
Distance sensor- magnetic tape max. 0.8 mm
Resolution 0.1 ... 0.01 mm
Repeat accuracy ± 2 inkrements
Maximum measuring length theoretically unlimited
Operation speed max. 4 m/s
Housing material zinc die cast
Protection class IP67
Connections round connector
Sensor cable drag-chain suitable, 6-wire, twisted pairs and double-shielded
Sensor cable length 0.1 bis max. 2.0 m
Sensor cable bending radius min. 60 mm
Weight ca. 30 g
Operating temperature 0 ... +50 °C
Storage temperature -10 ... +60 °C
Humidity max. 95 %, non-condensing
Influence of external 
magnetic fields
external magnetic fields > 1 mT, which directly impinge upon  the sensor, can affect the system accuracy