IZ16E测量和显示系统增量式测量和可视化,无需接线

    7 位数字 LCD 显示器,可显示符号和特殊字符
    电池状态和角度显示
    通过嵌入式外壳轻松安装(与Z16兼容)
    可选择显示模式:毫米、米、英寸(有分数显示)
    可调计数方向
    可调小数点和倍增因数
    按键可锁定
    可调参考值
    增量式和绝对式测量之间切换
    3个可调整的移位补偿量
    可选2个外置输入,用于特殊字符,通过RJ45
    可选2个外置输入,通过RJ45
    可用接口:RS232 / RS485 / RF868 MHz

Produktanfrage

MECHANICAL DATA

Housing norm panel housing
Housing material plastic, black
Housing dimensions (W x H) 96 x 72 mm
Panel cut out (W x H) 93 x 67 mm
Keyboard foil with short stroke keys
Installation depth (complete) min.30 mm, depends on version

ELECTRICAL DATA

 

Display 7 digit LCD (digit height 14 mm), with sign, battery status and measurement units
Perspective 12 o'clock
Measurement units mm / inch / m / °
Accuracy ± 1 digit
Power supply voltage battery  (1.5 V resp. 3 V), integrated or external. 24 V on request
Current consumption < 1 mA bei 1.5 V (with measuring system)
Battery Service life 1 ... 3 years (depending on battery type)
External inputs 2 x 5 ... 30 V (on request)
External Outputs 2 x 30 V open collector (on request)
Optional interfaces RS232 (SN100), RS485 (SN150), RF 868 MHz (SN600)
Connections fixed cable outlet, optional: round connector
Data memory Flash

ENVIRONMENTAL CONDITIONS

 

Operating temperature 0 ... +50 °C
Storage temperature -10 ... +60 °C
Humidity max. 80 %, non-condensing
Protection class (front) IP54 
Protection class (rear) IP40

MAGNETIC SENSOR

 

Type designation MS-250
Dimensions (L x W x H) 30 x 10 x 15 mm
Measuring principle magnetic, incremental
Required magnetic tape MB-20-25-10-1-R
Magnetic tape pole pitch 2.5 mm
Distance sensor/ tape max. 0.8 mm
Resolution 0.1 ... 0.01 mm
Repeat accuracy ±2 increments
Operation speed max. 4 m/s
Housing material zinc die cast
Protection class IP67
Connections fixed connection with indicator or optionally with round connector
Sensor cable drag-chain suitable, 6-wire, twisted pairs and double-shielded
Sensor cable length 0.1 ... 2.0 m
Sensor cable bending radius min. 60 mm
Weight approx. 30 g
Humidity max. 95 %, non-condensing
Influence of external magnetic fields external magnetic fields > 1 mT, which directly impinge upon the sensor, can affect the system accuracy.