Z60三轴位置指示器/计数器可编程通用位置指示器,用于三轴

    位置指示器,配有1个信号输入,最多可用于3个轴
    输入可用于传统编码器以及ag8亚游集团测量系统(增量式或绝对式)
    可调节参考值,移位补偿量和锯片厚度
    每个轴的数字控制输入(可配置)
    可选择脉冲、速度和同心度模式
    2个开路漏极和2个继电器输出
    可选模拟输出
    断电时数据存储
    串行RS232接口

Produktanfrage

MECHANICAL DATA

Housing norm panel housing
Housing material aluminium
Housing dimensions (W x H) 96 x 72 mm
Panel cut out (W x H) 93 x 67 mm
Keyboard foil with short stroke keys
Installation depth 33 mm (without connectors)

ELECTRICAL DATA

 

Display graphic LCD display 120 x 180 pixels 
Perspective 6 o'clock
Measurement units mm, m, Inch, RPM oder °
Accuracy ± 1 digit
Power supply voltage 24 VDC ± 20 %
Current consumption 120 mA (without measuring system)
Encor supply 24 VDC  or 5 VDC (order designation)
Load by encor/ measuring system max. 300 mA
Singnal inputs HTL, TTL, or RS422 (order designation)
Signal channels A, B, Z bzw. A, A', B, B', Z, Z' or RxD+, RxD-
Maximum input frequency 100 kHz, 500kHz on request
External inputs 3 control inputs (24 V, PNP)
Analog inputs optional: 0 ... 10 V or 0 ... 20 mA on request
Relay outputs 2 potential free shutters (24 VDC / max. 1 A)
External outputs 2 open drain outputs
Analog outputs optional: 0 ... 10 V or 4 ... 20 mA
Interfaces RS232
Connections pluggable screw terminals and 9 pin female D-SUB (for third axis)
Power down memory FRAM
optional accessories external power pack NG24.0

ENVIRONMENTAL CONDITIONS

 

Operating temperature 0 ... +50 °C
Storage temperature -40 ... +70 °C
Humidity max. 80 %, non-condensing
Protection class (front) IP43 (installed state)
Protection class (rear) IP40