Z50单轴位置指示器/计数器多功能单轴位置指示器,配有串行RS232接口

    连接到增量式和绝对式测量系统
    实际值存储器
    7位LCD显示,数字高14毫米
    2个数字输出
    串行接口

Produktanfrage

MECHANICAL DATA

Housing norm panel housing
Housing material ABS plastic, black
Housing dimensions (W x H) 96 x 72 x 31 mm (without seal), 98 x 74 x 31 mm (with seal)
Panel cut out (W x H) 93 x 67 mm
Keyboard membrane keypad
Installation depth 27 mm (with connectors)

ELEKTICAL DATA

 

Display 7 digit LCD (digit height: 14 mm) with sign and measurement units
Perspective 12 o'clock
Measurement units mm, m, Inch, RPM or °
Accuracy ± 1 digit
Power supply voltage 24 VDC ± 20 %
Current consumption 50 mA (without measuring system)
Encor supply 24 VDC or 5 VDC (order designation)
Load by encor/ measuring system max. 300 mA
Signal inputs HTL, TTL or RS422 (order designation)
Signal channels A,B bzw. A, A', B, B', Z, Z' or RxD+, RxD-, TxD+, TxD-
Maximum input frequency 100 kHz
External inputs 2 control inputs (24 V, PNP)
Interfaces RS232
Connections pluggable screw terminals, RS232 by mini-USB socket
Power down memory FRAM
Optional accessories external power pack NG24.0

ENVIRONMENTAL CONDITIONS

 

Operating temperature 0 ... +50 °C-20 ... +80 °C
Storage temperature -20 ... +80 °C
Humidity max. 80 %, non-condensing
Protection class (front) IP54 installed state (with seal), IP43 (installed state, without seal)
Protection class (rear) IP40