Z25单轴位置指示器/计数器可扩展编程脉冲计数器,用于单轴

    带单轴信号输入的位置指示器
    适用于传统的旋转和线性编码器以及ag8亚游集团增量式和绝对式测量系统
    可调参考值,移位补偿量和锯片宽度
    LCD显示器,带7位数字、符号和测量单位
    2个可编程数字控制输入
    断电时数据存储

Produktanfrage

MECHANICAL DATA

Housing norm panel housing
Housing material ABS plastic, black
Housing dimensions (W x H) 72 x 48 mm (without seal), 74 x 50 mm (with seal)
Panel cut out (W x H) 68 x 45 mm
Keyboard foil with short stroke keys
Installation depth 27 mm (without connectors)

ELECTRICAL DATA

 

Display 7 digit LCD (digit height: 14 mm) with sign and measurement units
Perspective 12 o'clock
Measurement units mm, m, Inch, RPM or °
Accuracy ± 1 digit
Power supply voltage 24 VDC ± 0 %
Current consumption 25 mA (without measuring system)
Encor supply 24 VDC
Load by encor/ measuring system max. 300 mA
Singnal inputs HTL, TTL or RS422 (order designation)
Signal channels A, B bzw. A, A', B, B', Z, Z' or RxD+, RxD-
Maximum input frequency 80 kHz
External inputs 2 control inputs (24 V, PNP)
Connection puggable screw terminals and 9 pin (female) D-SUB (only RS422, TTL)
Power down memory FRAM
Optional accessories external power pack NG24.0

ENVIRONMENTAL CONDITIONS

 

Operating temperature 0 ... +50 °C
Storage temperature -20 ... +80 °C
Humidity max. 80 %, non-condensing
Protection class (front) IP54 installed state (with seal), IP43 installed state (without seal)
Protection class (rear) IP40