测量系统mtm-q基于磁性的物理原理和用于定位、长度和/或固定圆轮廓的速度的高精度检测,如非旋转活塞杆液压缸。准绝对式无接触无磨损单轨测量系统版本:

    无触点无磨损测量原理
    非常稳健和成熟的测量技术
    不受污染
    高度抗震、抗冲击
    接口:模拟输出或CANopen
    供电:10…30VDC

Produktanfrage

MECHANICAL DATA

Measuring principle incremental (quasi-absolute)
Repeat accuracy ± 1 increment
System accuracy in µm at 20 °C ± (1000 + 20 x L) L = measuring length in meters
Distance sensor / piston rod max. 5.0 mm
Sensor housing material measuring system: aluminium with casting compound
Housing dimensions measuring system: 64 x 44 x 43 mm 
entire system: depending on used piston rod and stroke length
Suitable round rod coded round resp. piston rod with minimum Ø 25 mm
 Pole pitch of piston rod 16 mm
Maximum measuring length 5000 mm
Connections standard: open cable ends
option 1: 8-pin M12 x 1 (male) round connector at the housing
option 2: 8-pin M12 x 1 (male) round connector at the signal cable
Sensor cable 0.15 m standard length others on request
Sensor cable bending radius 60 mm
Weight measuring system: approx. 170 g
entire system: depends on measuring length  (= stroke length to be monitored) and application
cable: approx. 60 g/m

ELECTRICAL DATA

Power supply voltage 10 ... 30 VDC
Residual ripple 10 ... 30 VDC: < 10%
Current consumption 10 ... 30 VDC: max. 150 mA
Output interface (depends on order information) 12 bit analog (U) 0.5 ... 4.5 V
12 bit analog output (I) 4 ... 20 mA
CANopen standard (DS406)
Operating speed 2 m/s

ENVIRONMENTAL CONDITIONS

Storage temperature -25 ... +85 °C
Operating temperature -10 ... +70 °C -25 ... +85 °C on request
Humiditiy max. 95 % non-condensing
Protection class measuring system: standard: IP65 optional: IP69K
mechanical system: depending on used piston rod and material