MTM-I磁性线性增量式编码器圆形棒/活塞杆上无磨损的位置测量

    测量系统配有单轨编码活塞杆和传感器
    用于液压缸中的长度和位置的检测
    增量式设计,采用两种分辨率
    非接触式、完全无磨损的磁性测量原理
    非常耐用,不受污垢影响
    极为抗冲击、抗震
    电源电压10到30 VDC或5 VDC
    输出电平,HTL或TTL

Produktanfrage

MECHANICAL DATA

Measuring principle incremental
Repeat accuracy ± 1 increment
System accuracy in µm at 20 °C ± (160 + 20 x L), L = measuring length in meters
Distance sensor / tape max. 1.0 mm
Sensor housing material sensor system is integrated in the round resp. piston rod
Housing dimentions depending on used piston rod and stroke length
Required magnetic tape coded round resp. piston rod
 Pole pitch of piston rod 5 mm,
Maximum measuring length 5000 mm
Connections standard: open cable ends, optional: 9 pin D-SUB or 8 pin M12 round connector
Sensor cable 1,5 m standard length, others on request,
drag chain suitable
Sensor cable bending radius 60 mm
Weight depends on measuring length  (= stroke length to be monitored) and application ; cable: approx. 60 g/m

ELECTRICAL DATA

Power supply voltage 10 ... 30 VDC or 5 VDC
Residual ripple 10 ... 30 VDC: < 10%, 5 VDC: ± 25 mV
Current consumption 10 ... 30 VDC: max. 150 mA, 5 VDC: max. 200 mA
Output signals A, A', B, B', Z, Z'
Output levels HTL or TTL
Output current per channel max. 20 mA
Resolution (at 4 edge evaluation) 0.025 mm
Index pulse every 5 mm (periodically)
Max. output frequency per channel 100 kHz
Operating speed 4 m/s

ENVIRONMENTAL CONDITIONS

Storage temperature -25 ... +85 °C
Operating temperature -10 ... +70 °C, -25 ... +85 °C on request
Humiditiy 95 %, non-condensing
Protection class sensor system: standard: IP67, optional: IP69K
mechanical system: depending on used piston rod and material