LIMIX长度测量系统用于电梯轿厢应用

    应用于恶劣环境下的耐用测量原理
    抗污、抗烟、抗潮湿
    电梯轿厢直接测量
    简单、灵活的安装
    分辨率为0.625毫米(4边沿触发时)
    运行速度可达5米/秒
    由自润滑材料制成的聚合物导向

Produktanfrage

 MECHANICAL DATA

Measuring principle incremental
Repeat accuracy ± 1 increment
System accuracy in  µm at 20 °C ± (25 + 20 x L), L= measuring length in meters
Distance sensor/ tape max. 2.0 mm
Sensor housing material sensor head: zinc die cast, guiding block: slidable PA6G oil
Housing dimensions
(L x W x H)
sensor head: 30 x 12.5 x 25 mm, guiding block: 51 x 22 x 32 mm
Required magnetic tape MB20-50-10-1-R-D-EP-LIFT
Pole pitch 5 mm
Max. measuring length 600 m
Connections open cable ends, connectors optionally
Sensor cable 1.5 m standard length, others on request, drag chain suitable
Sensor cable bending radius 60 mm
Weight sensor head + guiding block: approx. 60 g (without cable); cable: approx. 60 g/m

 ELECTRICAL DATA

Power supply voltage 10 ... 30 VDC or 5 VDC
Residual ripple 10 ... 30 VDC: <10 %, VDC: ± 25 mV
Current consumption 10 ... 30 VDC: max. 150 mA, VDC: max. 200 mA
Output signals A, A', B, B', Z, Z' resp. R, R'
Output levels HTL or TTL
Output current per channel max. 20 mA
Resolution (at 4 edge evaluation) 0.625 mm
Index pulse every 5 mm (periodically)
Max. output frequency per channel 4 kHz
Operating speed 5 m/s (at HTL and optimal evalution)

ENVIRONMENTAL CONDITIONS

Storage temperature -25 ... +85 °C 
Operating temperature -10 ... +70 °C, -25 ... +85 °C on request
Humiditiy 95 %, non-condensing
Protection class IP67