GMIX1A通用测量系统可选分辨率和VMAX输出,用于木工机器

    5种不同的可调分辨率
    重复精度+/- 0.01毫米
    速度监控LED和信号输出(符合裁板锯规定的最大25米/分钟)
    可切换输出电平(24 V推挽式或V-TTL线驱动)
    每个频道的状态LED(A、B和Z)
    紧凑型传感器,高防护等级IP67
    方波信号速度比输出
    外置金属外壳,用于读值和调整

Produktanfrage

MECHANICAL DATA

Measuring principle incremental
Repeat accuracy ± 1 increment
System accuracy in µm at 20 °C ± (25 + 20 x L), L= measuring length in meters
Distance sensor / tape max. 4.0 mm
Sensor housing material sensor head: zinc die cast, translator box: galvanized steel sheet
Housing dimensions (L x W x H) sensor head: 30 x 10 x 15 mm
Required magnetic tape MB20-50-10-1-R
Pole pitch 5 mm
 Max. measuring length theoretically unlimited
Connections 9 pin D-SUB (in translator housing)
Sensor cable 1.5 m standard length, others on request, drag chain suitable 
Sensor cable bending radius 60 mm
Weight sensor head: approx. 15 g without cable, cable: approx 60 g/m, translator box: approx. 280 g

ELECTRICAL DATA

Power supply voltage 10 ... 30 VDC
Residual ripple < 10 %
Current consumption max. 300 mA
Output signals A, A', B, B', Z, Z'
Output levels HTL/ TTL (switchable)
Output current per channel max. 20 mA
Resolution (at 4 edge evaluation) 0.1/ 0.5/ 0.025/ 0.02 or 0.01 mm (switchable)
Index pulse every 5 mm (periodically),
Max. output frequency per channel depends on selected resolution
Operating speed depends on selected resolution

ENVIRONMENTAL CONDITIONS

Storage temperature -25 ... +85 °C
Operating temperature 0 ... +50 °C (sensor and translator box)
Humidity 95 %, non-condensing
Protection class sensor head: IP67, translator box: IP40